A picture
Product Detail
This is a high speed feedback suppressor that can be connected to 10 microphone inputs and 2 balanced outputs. Each microphone with independent 48V phantom power and gain adjustment. Two Lotus line inputs and outputs and two music inputs. The panel is equipped with a display that shows the current operating status and signal level, and the panel switches between pass-through and feedback at the touch of a button. 10 microphone inputs have a built-in automatic mixer. In many cases, such as on a podium or conference table, two microphones can better capture the voice of a moving speaker, which often increases the risk of acoustic feedback. With this in mind, an automatic mixer will automatically reduce the gain of the microphone with the weaker signal input, while increasing the gain of the other microphone with the stronger signal input. In this way, it can track a moving speaker and produce optimal sound clarity.
- 10-way microphone input, independent volume adjustment, independent 48V power supply.
- Intelligent mixing of A and B zone mics
- Line in/out, music input (independent volume control) Lotus connector
- Professional digital feedback suppression module, through/feedback mode can be converted.
- Professional frequency display, monitoring the output level at a glance.
Scope of application:
Conference, theatre, auditorium, classroom, multi-purpose hall and other places with high level sound requirements.
Product parameters
- Voltage: 230/115 VAC, ±10%, 50/60 Hz
- Inrush current: 1.5 A, 230 VAC / 3 A, 115 VAC
- Maximum power consumption: 50 VA
- Sampling rate: (fs) 32 kHz
- Frequency Response: 125 Hz - 15 kHz
- Distortion: < 0.1 % (at 1 kHz)
- Signal-to-noise ratio: > 90 dB
- Signal delay: < 11 ms
- Decoupler frequency shift: up to 5 Hz
- Mic Inputs: 10-way, balanced XLR connectors
- Line Input: Lotus
- Input Impedance: 10K ohm / 2 ohm (Line / Mic)
- CMRR : >25 dB (50 Hz to 20 kHz)
- Phantom Power: 48V (Mic only, switchable)