A picture
Product Detail
It is a wide bandwidth condenser omni-directional directional microphone, small design, especially suitable for mounting on inconspicuous desktop, ceiling, instrument panel use.
It can be used for professional recording, TV broadcasting, video conferencing and other demanding audio applications.
The microphone should be mounted on a flat, unobstructed surface. The small, near-planar microphone head eliminates phase distortion and provides a clear, high-output performance.
The built-in power supply module operates on phantom power from 11V to 52V DC. The microphone housing is made of a durable alloy casting with a double-layer protective mesh design and a black non-reflective coating, while the ES945W has a white coating.
The ES945W has a white coating. The microphone is fitted with anti-vibration insulation to prevent vibration noise on the mounting surface.
Product parameters
Receiver head: Fixed charge back, electrostatic condenser type
Directional characteristics: Omni-directional
Frequency Response: 40-18,000 Hz
Turn-on sensitivity: -40 dB (7.9 mV) at 1V over 1 Pa
Output impedance: 200 ohms
Maximum Sound Pressure: 142 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical) 112 dB, 1 kHz at maximum sound pressure
Signal-to-noise ratio: 64 dB, 1 kHz at 1 Pa.
Phantom power: 11-52V DC, 2 mA typical
Weight: 63 g
External dimensions: 28.0 mm - diameter, 69.0 mm - length
Output Connector: Internal 3-pin canonical male connector