A picture
Product Detail
It is an all-metal casting case for microphones that are highly resistant to RF interference whenever close to or shared with a wireless device and can be used in harsh environments.
The microphone is equipped with a shock-proof sound head bracket, the sensor can effectively suppress the processing noise.
When the microphone vibrates when in use, you can attach the microphone to an attached shock absorber and tighten it for ease of use.
Product parameters
Type: Electrostatic condenser microphone
Directionality: Single directionality
Frequency response: 20-20000HZ
High pass filtering: 80Hz, 12dB/octave
Sensitivity: -36db/+1dB (1KHz)
Impedance: 100ohms
Input sound pressure level: 145dB SPL (1KHZ, THD 1%)
Noise: 12 dB SPL
Dynamic range (typical value): 133dB, 1kHz at Max SPL
Signal to noise ratio: 82 dB, 1kHz at 1Pa
Phantom power supply: 48V DC, 4.2 mA typical
Weight: 380g
Size: 55mmx190mm (diameter x length)
Cable length: 10m
Attachment: 1 windproof cover (black), 1 shock-absorbing bracket