0 HEKEBIT HEKEBIT

Wireless Microphone/ Wireless Headset Microphone/

UWH-D8+W18
True diversity wireless microphone

02

Product Detail

Detailed

Quad-tuned true diversity automated signal selection, eliminating dead spots and avoiding signal cuts.
Infrared spectral technology (fast and reliable).
Phase Locked Loop Frequency Synthesiser, 38KHz Frequency Guide Technology, Wide Dynamic Range and High Sound Reproduction, Low Power Consumption
Scope of application of this system:
Professional performance stage, cabaret, conference room, educational lectures, etc.
ID code identification, not easily affected by external interference and influence.

03

Product parameters

Specification

Receiver parameters:
● Carrier frequency range: 600MHz-650MHz frequency (frequency band can be changed as needed)
Stability: 0.005%
Effective working distance (ideal environment): ≥ 200 meters
Audio sampling rate: 48KHz
● Audio frequency response: 50Hz-1800Hz ± 3dB;
Dynamic range: 92 dB
Signal to noise ratio: 105 dB
Total harmonic distortion: ≤ 0.8%, @ 1KHz
● Audio response: 60Hz-15KHz (± 3dB)
● Working temperature range: -10 ℃~+50 ℃
● Reception method: Four channel, super heterodyne true diversity reception;
Image suppression: 45dBm
RF sensitivity: When inputting 10dBu, S/N ≥ 45dB;
● Quiet noise adjustment: built-in setting parameters
● Frequency synchronization method: Infrared SYNC
Maximum output level: LINE: 0.5Vpp;
● Audio output interface: Four channel hybrid card dragon output
● Audio output/input interface: RJ45 Ethernet port
● Display: LED high-definition display screen
Normal operating current: DC 12V: 1000mA

Microphone parameters:
● Transmitter structure: metal waist bag+skin tone headband
● Transmitter indication: power switch indication, low voltage indication, frequency confirmation indication
● Transmitter operation: power control
● Frequency range: 600~650MHz
● Transmission power: 10mW
● Oscillation mode: Phase Locked Loop Frequency Synthesis (PLL)
● Frequency selection: Receiver selection, infrared frequency matching determines transmitter operating frequency
Frequency stability: ≤± 0.005%
Modulation method: FM
Maximum frequency offset: ± 50KHz
● Directional characteristics: Capacitive single directional
Frequency response: 100Hz-12KHz
Sensitivity: -43dB/± 2dB (1KHz)
● Working power supply: DC 3V (2 No. 5 batteries)
Working current: ≤ 100mA

0%