A picture
Product Detail
1. High-tech appearance design, built-in antenna, the overall novel fashion, solemn.
2.
With a high-brightness full-view LED display, can display the
microphone frequency, power, switch status, display content is clear.
3.
The head of the microphone is designed according to the acoustic
spatial principle, and adopts moving-coil microphone core, so that the
sound quality of the human voice to achieve high-fidelity restoration.
4.
The unit uses UHF wireless technology to transmit audio and control
signals, F effective communication distance: indoor 50 metres Outdoor 80
metres
5. Ultra-low power consumption circuit design, continuous
speaking time of not less than 8 hours, standby time of not less than 12
hours
Main features:
*Use UHF 600 ~ 650MHz
band, the application of PLL frequency synthesis phase-locked loop
technology, frequency adjustable, can be used at the same time 5 sets,
without interference.
*Integrated central processor CPU total
control, with digital high-definition LED interface display, easy to
operate, outstanding performance.
*Adopting multi-stage narrow-band
high-frequency and mid-frequency frequency selective filtering, fully
eliminating interfering signals.
*Adopting audio compression extension technology, the noise is greatly reduced and the dynamic range is increased.
*The receiver adopts multi-stage high-frequency amplification, with extremely high sensitivity.
*Ideal space use distance of 50 metres.
Product parameters
Receiver parameters:
Operating frequency: UHF600~650MHz (adjustable)
DC input voltage: DC12V 1000mA
Oscillation mode: Dual phase locked frequency synthesis (PLL)
Adjustment method: FM
Maximum frequency offset: ± 50KHz
Frequency response: 60Hz~18000Hz
Signal to noise ratio: ≥ 89dB
Low frequency attenuation: 125Hz 6dB/OCTAVE
Output impedance: 250 Ω
Maximum withstand sound pressure: 135dB SPL 1KHz at 1% T.H.D
Dynamic range: ≥ 105dB
S/N signal-to-noise ratio:>98dB
T. H. D distortion:<0.5%
Microphone parameters:
Transmitter structure: plastic waist bag+collar clip
Transmitter indication: power switch indication, low voltage indication, frequency confirmation indication
Transmitter operation: power control
Frequency range: 600~650MHz
Transmission power: 10mW
Oscillatory Mode: Phase Locked Loop Frequency Synthesis (PLL)
Frequency selection: Receiver selection, infrared frequency matching to determine transmitter operating frequency
Frequency stability: ≤± 0.005%
Modulation method: FM
Maximum frequency offset: ± 50KHz
Directional characteristics: capacitive single directional
Frequency response: 100Hz-12KHz
Sensitivity: -43dB/± 2dB (1KHz)
Working power supply: DC 3V (2 No. 5 batteries)
Working current: ≤ 100mA